Balboa Auxiliary / Slave Heater - 3.0kW
Works with GS, GL & BP Systems
Balboa 3.0KW Auxiliary heater fitted In-Line and can be used with nearly all Balboa Spa Packs with M7 sensors.
They are for larger spas that require additional heating. Flow detection is governed by the master spa pack.
In built high limit sensor.
IMPORTANT: Please check that your RCD and cabling is adequate before installation.
| Type | Flow Thru |
| MPN | 58133 |
| Element | Incoloy |
| Integrated in Spa Pack | No |
| Sensor Type(s) | M7 - Probe, Hi Limit - Probe |
| Mount Type | Stud |
| Length (includes tails) | 495.3 mm |
| Plumbing Connection | 2.0'' |
| Power | 3.0 kW |
| Voltage / Hz | 230V - 50/60Hz |
| Amps | 11.5-12.0 |
| Element Type | Incoloy |
| Element Length | 10" (255mm) |
| Compatible Spa Pack | Balboa GS/GL Plastic Box, Balboa GS/GL Metal Box |
| Amp | 11.5/12.0 A |
| Supply V/Hz | 230V / 50Hz |
| Min Flow | 21gpm |
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
