Pure-Spa Non Chlorine Oxy-Shock

Pure-Spa - Non Chlorine Oxy-Shock Granules - 1kg

These chlorine free shock granules are ideal for regular oxidisation of spa water. They are suitable for spas running on chlorine or bromine.

Instructions 

1. Maintain pH levels within the ideal range 7.2-7.6. If the level is not in this range, adjust.

2. Maintain free chlorine or bromine levels in spas of 3-5mg/l (ppm). If the level is not in this range, adjust.

3. Pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean warm water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near the water inlets to aid distribution.

4. After shock treatment procedure, allow at least 30 minutes before bathing recommences.

Please take note of safety and handling advice as stated on the label